Micro surfacing is a mixture of polymer modified asphalt emulsion,100% manufactured aggregate, Portland cement, water, and liquid additives. The mixture is proportioned according to specifications and laboratory mix design. Microsurfacing is a quick set, quick traffic system that is able to accept traffic after a short period of time. Traffic is usually able to resume as normal within hours of application, but set times may very depending on weather and conditions specific to each project.

Micro surfacing is used for rut filling, longitudinal and transverse crack repair (special spread boxes are used), leveling or scratch course, and surfacing in all traffic conditions from urban streets to major highways. Microsurfacing my be applied to most structurally sound pavement surfaces with out the need for a tack coat or rolling.

The 100% manufactured aggregates offer suburb physical properties combining durability, wear and an esthetically pleasing appearance. These aggregates generally come in three distinct groupings: Type 1 (fine) Type 2 (standard) and Type 3 (coarse).

Type 1 (#200*1/8): A very fine aggregate that generates maximum crack penetration while sealing residential traffic areas.

Type 2 (#200*1/4): The most commonly used aggregate for Micro Surfacing, utilized in urban areas, arterial roadways and highways. This product fills minor surface cavities and corrects weathered, pitted and raveling asphalts.

Type 3 (#200*3/8): A coarse aggregate that is primarily used in “Rut Fill” applications and highway resurfacing. This aggregate provides superior skid resistance and reduces hydroplaning/ wheel rutting in heavy traffic areas.

Micro surfacing is an economical alternative to road maintenance practices for municipalities and its’ ratepayers. West-Can Seal Coating is available to consult with the owner, in selecting the proper job specific products to meet each roadways maintenance needs. For additional Micro Surfacing information or International Slurry Seal Association (ISSA) guidelines please look at www.slurry.org

Adobe Flash Player Required

This Web Photo Gallery requires Adobe Flash Player v6 or later. For further information, and to download Adobe Flash Player, click here.

Get Adobe Flash player

Advantages of Using Micro Surfacing as a Maintenance Tool:

• Low resurfacing cost per M2
• No asphalt milling
• No joint cutting or need to adjust utilities
• Fills cracks while providing a leveled surface
• No curb loss reveal
• Minimal traffic disruption
• No fly stone or dust
• Low energy consumption, no blue smoke
• Reduces ponding, eliminating hydroplaning
• Increased skid resistance
• No mechanical compaction
• 100% recyclable